Changing the Bell Schedules.
1. Turn the Programming Key to the PROGRAM poistion (Located on the front of the system's Power Supply.)
- or Press Program Function 66666*. (Display will read Progarm Enabled.)
- Press the Cancel Key.
2. Press TIME FUNCTION.
- 4x Where X is the Schdeule 1-8 to program
- E1 should be on the display
- Press * to advance through the schedule
- 12345 is the days of the week M-F
- 24 Hour Time is next 15:30 = 3:30pm
- # is the time zone *
- # is the Bell Tone *
- Once at the last EVENT E# press 0**
3. Select Bell Schedule to Enable Where:
- 5x where X is the Schedule 1-8
- 50 Turns all Bell Schedules off
4. Press *.
- Example: To turn Bell Schedule 1 on Time Function 51*.
5. Turn the Programming Key back to Run position.
- or Press Program Function 66666*. (Display will read Progarm Disabled.)
- Press the Cancel Key.